- Home
- Networking
- CCNP Troubleshooting 642-832
96.
What interface configuration mode command can you enter in a Cisco Catalyst
switch to instruct the interface to trust incoming DHCP markings?
- A.wrr-queue dscp
- B.wrr-queue bandwidth dscp
- C.mls qos trust dscp
- D.mls qos trust-device dscp
- Answer
- Report
Answer : [C]
97.
What command can you use to display the VLANs that are permitted on the trunk
ports of a switch?
- A.show interfaces trunk
- B.show trunk interfaces
- C.show switchport trunk
- D.show trunk switchport
- Answer
- Report
Answer : [A]
98.
Which two ports does LWAPP traffic use? (Choose the two best answers.)
- A.TCP port 12222
- B.UDP port 12222
- C.TCP port 12223
- D.UDP port 12223
- Answer
- Report
Answer : [B, D]
99.
What wireless network mode of operation is characterized by having the functions of
a traditional wireless access point divided between a lightweight access point and a
wireless LAN controller?
- A.Autonomous
- B.Split horizon
- C.Split-MAC
- D.Split tunneling
- Answer
- Report
Answer : [C]
100.
Which three of the following steps should be performed prior to configuring AutoQoS on a router interface? (Select the three best answers.)
- A.Configure an IP address on the interface.
- B.Enable Cisco Express Forwarding on the router.
- C.Configure the bandwidthcommand on the interface.
- D.Enable RSVP on the interface.
- Answer
- Report
Answer : [A, B, C]
|
|
||||||||||||||||||||||||||||
