- Home
- Networking
- CCNA Wireless
101.
Which one of the following is a true statement?
- A.An autonomous AP cannot connect to a DS.
- B.An autonomous AP connects through a centralized controller.
- C.An autonomous AP operates in a standalone fashion.
- D.None of these answers are correct.
- Answer & Explanation
- Report
Answer : [C]
Explanation :
Explanation :
| An autonomous AP is a standalone AP; it offers a basic service set (BSS) and connects to a distribution system (DS), all without the need for a centralized controller. |
102.
Which of the following ports are available on an autonomous AP? (Choose all that
apply.)
- A.Console port
- B.Service port
- C.Ethernet port
- D.Dynamic interface
- Answer & Explanation
- Report
Answer : [A and C]
Explanation :
Explanation :
| An autonomous AP has a console port for configuration and management and an Ethernet port to connect to the wired network. Service ports and dynamic interfaces are used on wireless LAN controllers instead. |
103.
After looking at a sticker on the back of an autonomous AP, you see MAC
C4:7D:4F:12:34:56 listed. Which one of the following is a safe assumption?
- A.The string of numbers is the 2.4-GHz radio base MAC address.
- B.The string of numbers is the 5-GHz radio base MAC address.
- C.The string of numbers is the Ethernet port MAC address.
- D.All of the above are correct.
- Answer & Explanation
- Report
Answer : [D]
Explanation :
Explanation :
| The answer is all of the above because the sticker lists the MAC address that is used as the base address for both radios as well as the Ethernet port. |
104.
Which methods can be used to assign an IP address to an autonomous AP? (Choose
all that apply.)
- A.DHCP
- B.Static through the CLI
- C.TFTP
- D.DNS
- Answer & Explanation
- Report
Answer : [A and B]
Explanation :
Explanation :
| An autonomous AP tries to use Dynamic Host Configuration Protocol (DHCP) by default, but you can configure a static address if necessary. |
105.
If the IP address of an autonomous AP is not yet known, which of the following
methods could you use to find it? (Choose all that apply.)
- A.DHCP server logs.
- B.CDP
- C.AP console CLI
- D.AP management GUI
- Answer & Explanation
- Report
Answer : [A, B and C]
Explanation :
Explanation :
| You can use all of the methods except the AP management GUI to find the AP’s IP address. Without the IP address, you would not be able to open a browser to the management GUI. |
|
|
||||||||||||||||||||||||||||
