- Home
- Networking
- CCNA Wireless
96.
The FlexConnect architecture is normally used in which of the following scenarios?
- A.APs located in a main campus
- B.APs located in remote branch sites
- C.APs located in the cloud
- D.None of the above, because FlexConnect is a Catalyst switch feature
- Answer & Explanation
- Report
Answer : [B]
Explanation :
Explanation :
| FlexConnect is normally used in remote branch sites because it offers local Wireless so that branch users can access local resources if the WAN link or CAPWAP tunnel is down. |
97.
A Cisco centralized wireless network is built with 1000 lightweight APs and a Cisco
5520 WLC. Suppose wireless coverage needs to be offered in several additional buildings, which will double the number of APs in use. Which of the following strategies
would work? (Choose all that apply.)
- A.Add another 5520 WLC.
- B.Replace the 5520 with a WLC that offers a greater AP capacity.
- C.The 5520 will become full, so replace the APs with models that can cover twice the area.
- D.Do nothing; you can have only one WLC in a network and no other model offers more APs than the 5520.
- Answer & Explanation
- Report
Answer : [A and B]
Explanation :
Explanation :
| You can have multiple WLCs in a Cisco wireless network, so you could add a second 5520 or replace the existing one with a more robust model. You should not try to expand the coverage of each AP, rather than expand the capacity of the WLC. |
98.
Which of the following Cisco Aironet AP models should you choose if you expect to
see 802.11ac Wave 2 clients in the near future? (Choose all that apply.)
- A.1700
- B.1850
- C.2700
- D.3700
- Answer & Explanation
- Report
Answer : [ B and D]
Explanation :
Explanation :
| The 1850 AP offers 802.11ac Wave 2 right out of the box. You could also leverage the 3700 model because it supports 802.11ac Wave 1 now and will support Wave 2 with the addition of a future expansion module. |
99.
Five Cisco Catalyst 3850 switches are configured as a single switch stack. The switches are also configured as a controller to support a converged wireless network. What
is the maximum number of lightweight APs that can be joined to the switch stack?
- A.10
- B.50
- C.500
- D.1000
- Answer & Explanation
- Report
Answer : [B]
Explanation :
Explanation :
| The maximum number of APs is limited by the switch stack as a whole, not by individual member switches in the stack. Therefore, a maximum of 50 lightweight APs can be joined to the stack. |
100.
Suppose that you need to set up an autonomous AP so that it will offer three different SSIDs to clients. The AP will be connected to a wired network infrastructure.
Which one of the following is a true statement about the AP?
- A.It can support only one SSID, which must be carried over an access link.
- B.It can support multiple SSIDs over an access link.
- C.It can support multiple SSIDs over an 802.1Q trunk link.
- D.An autonomous AP needs a centralized controller to support SSIDs.
- Answer & Explanation
- Report
Answer : [C]
Explanation :
Explanation :
| A trunk link is needed to carry multiple service set identifier (SSIDs) to multiple virtual LANs (VLANs). |
|
|
||||||||||||||||||||||||||||
