Correct Answers :

[D]

Explanation :

Form factor refers to the physical appearance and dimensions of the server.

Correct Answers :

[B]

Explanation :

Rail kits, when implemented, allow for the server to be slid out of the rack for maintenance.

Correct Answers :

[C]

Explanation :

Each U is 1.75 inches (4.445 cm) high.

Correct Answers :

[D]

Explanation :

RAID 1 is also known as disk mirroring. This is a method of producing fault tolerance by writing all data simultaneously to two separate drives.

Correct Answers :

[A]

Explanation :

The Preboot Execution Environment (PXE) is an industry standard client/server interface that allows networked computers that are not yet loaded with an operating system to be configured and booted remotely by an administrator.

Correct Answers :

[B]

Explanation :

There are three ways the allocation of the use of the physical CPU(s) can be controlled. These methods are as follows:
->Shares: Using values such as Low, Normal, High, and Custom (in VMWare, for example), these values are compared to the sum of all shares of all virtual machines on the server. Therefore, they define the relative percentage each VM can use.
-> Reservation: Guaranteed CPU allocation for a VM.
-> Limit: Upper limit for a VM’s CPU allocation.

Correct Answers :

[D]

Explanation :

In a classic SAN, devices communicate using the Fibre Channel protocol over a fiber network of storage devices typically connected to a Fibre Channel switch.

Correct Answers :

[D]

Explanation :

Implementing a NAS is inexpensive when compared to implementing a SAN.

Correct Answers :

[A]

Explanation :

A logical unit number (LUN) identifies a device addressed by the SCSI protocol or protocols that encapsulate SCSI, such as Fibre Channel or iSCSI.

Correct Answers :

[A]

Explanation :

DHCP servers are used to automate the process of providing an IP configuration to devices in the network. These servers respond to broadcast-based requests for a configuration by offering an IP address, subnet mask, and default gateway to the DHCP client.

Correct Answers :

[B]

Explanation :

IOPS (Input/Output Operations per Second, pronounced eye-ops) is a common disk metric that describes how fast the disk subsystem is able to read and write to the drive. Therefore, the higher this value, the better.

Correct Answers :

[D]

Explanation :

Print servers need lots of memory to hold the print jobs waiting in the print queue. The exact amount will depend on the number of users assigned to the printers being managed by this print server.

Correct Answers :

[A]

Explanation :

Managing log files can be done at the command line using the following command, inserting the name of log file and the maximum size in bytes: wevtutil sl <LogName> /ms:<MaxSizeInBytes>

Correct Answers :

[A]

Explanation :

Manually performing a disk cleanup will allow you to get rid of these files (and many other useless files as well), but if you would like to create a batch file, you can automate the process.

Correct Answers :

[C]

Explanation :

A minimum of three drives is required for RAID 5.

Correct Answers :

[A]

Explanation :

With respect to fire, no safe is fireproof. Many are fire resistant and will protect a document from being destroyed, which occurs at a much higher temperature than many of the other items (such as backup tapes and CDs) can tolerate without damage. For these reasons, items such as backup tapes should be stored offsite.

Correct Answers :

[D]

Explanation :

A host-based system is installed on the device (for purposes of our discussion, a server) and the system focuses solely on identifying attacks on that device only

Correct Answers :

[B]

Explanation :

For your Windows servers, an excellent tool is the Microsoft Baseline Security Analyzer (MBSA). This tool can identify missing security patches, weak passwords, and other security issues that are specific to installed products.

Correct Answers :

[A]

Explanation :

Since Sally will use Joe’s public key to verify the signature, he must sign it with his private key.

Correct Answers :

[D]

Explanation :

While passwords and usernames are examples of something you know and a smartcard is an example of something you possess, a retina scan provides something you are.